|
LUBRIKA 101 PUNCH AND DIE LUBRICANT
DESCRIPTION
LUBRIKA 101 is a very effective water-based punch and die lubricant
especially formulated for hot forging ferrous metals on presses. It has been developed taking into consideration the main
operational parameters encountered in the forging operations, especially those operations where the movement of the metal
is very severe.
LUBRIKA 101 has been conceived to provide good performance even at temperatures above 400 grades
centigrade. The graphite, its main active ingredient, has a very high carbon content, low ash, microscopic particle size and
hexagonal and plain geometry thus permitting a very homogeneous film formation over dies and punches.
LUBRIKA 101 combines effective die filling as well as excellent wetting at various forging temperatures.
TYPICAL
APPLICATIONS
Upsetting of tubular products and hot forging of
steel on mechanical and hydraulic presses.
| Solid lubricant: | | Processed micro graphite | | Solid
content: | | 18% | | Carrier/diluent: | | Demineralized
water | | Consistency of the concentrate: | | Thixotropic
fluid | | Consistency of the dilution | | Liquid | | Density: | | 1.15 gr/cm3 | | Freezing point: | | 0°C | | Color: | | Black | | Shell life | | One year under original seal | | PH | | 11 | | Viscosity | | (20 rpm #2) 800 mPa.s min. |
LUBRIKA 101 is concentrated and must be diluted with water prior to its application to the dies
and punches. The dilution ratio (product:water) may vary from 1:7 to 1:14. Factors such as type of atomization nozzles, distance and time of application will influence the determination
of the most suitable dilution ratio required. The correct dilution is made by adding water to the concentrate with moderate
stirring.
METHOD OF APPLICATION
Diluted LUBRIKA 101 must
be applied to the dies and punches through spraying techniques using suitable lubrication equipments functioning in synchronism
with the press.
Reseal LUBRIKA 101 containers tightly
to prevent contamination. Avoid freezing.
See Material Safety Data Sheet for additional information on handling, precautions and first aid instructions.
Plastic pails 20kg Metallic drums: 225 kg Plastic totes: 1000 kg Export containers: 72 drums or 20 totes
Information presented in this Product Data Sheet is considered reliable, and will
deliver the performance as stated, but conditions and methods of use, which are beyond our control, may modify results. Before
adopting our products for commercial use, the user should confirm their suitability. In no case should recommendations or
suggestions for the use of our products be understood to sanction
violation of any patent.
|
