|
LUBRIKA SYNFOR FORGING LUBRICANT
DESCRIPTION
LUBRIKA SYNFOR is a completely free of graphite Hot and Warm Forging Die Lubricant
especially developed to lubricate and cool dies operating in presses forging automotive parts. It is able to impart a low
coefficient of friction to the die surface and this reflects in a controlled and improved metal flow and no under fillings.
Its unique formulation also has release and protective properties so forged parts are removed from the dies easily and with
no damage to the die surface. It wets dies even at high temperatures of up to 350°C.
Properly applied to the die cavities by spray atomization LUBRIKA SYNFOR will permit a smooth flow
and release of the metal.
LUBRIKA SYNFOR is smokeless, nonflammable and has no harmful vapors.
Specific advantages offered by LUBRIKA SYNFOR include:
- Excellent lubricity
- Superb release
- Efficient die filling
- Lower associated disposal costs
- Environmentally
friendly
- Uniform wetting of hot dies
- Extended die life
- Noncorrosive
TYPICAL
APPLICATIONS
Automotive steel forgings made in Presses and Hammers.
| Solid lubricant: | | Soluble synthetic | | Solid content: | | 14,5 to
15,5% | | Carrier/diluents: | | Demineralized water/ water | | Consistency: | | Fluid | | Density: | | 1.07 g/cm3 | | Freezing point: | | 0°C | | Color: | | Green, Yellow
or Blue (customer's choice) |
LUBRIKA SYNFOR is a concentrate and must be diluted with water prior to its application to the dies.
The dilution ratio has to be determined according the weight, complexity, and operating variables such as die temperature,
speed of the operation, etc. Also factors such as type of atomization nozzles and characteristics, distance of application
and time of application will influence the determination of the most suitable dilution ratio required. The correct dilution
is made by adding water to the concentrate with moderate stirring. A starting evaluating at 1:7 (Product: water) is recommended.
Dilution ratios, however, can exceed 1:10 (product: water) depending on the forging operation.
METHOD OF APPLICATION
Diluted LUBRIKA SYNFOR must be only
spray applied to the die cavities. Handguns or automatic equipments such as reciprocators can be used for this purpose.
Reseal LUBRIKA SYNFOR containers
tightly to prevent contamination. Avoid freezing.
See Material Safety Data Sheet for additional information on handling, precautions and first aid instructions.
Plastic pails 20kg Metallic drums: 225 kg Plastic totes: 1000 kg Export containers: 72 drums or 20 totes
Information presented in this Product Data Sheet is considered reliable, and will
deliver the performance as stated, but conditions and methods of use, which are beyond our control, may modify results. Before
adopting our products for commercial use, the user should confirm their suitability. In no case should recommendations or
suggestions for the use of our products be understood to sanction
violation of any patent.
|
